<?xml version="1.0" encoding="utf-8"?>
<witsml:drillReports version="1.4.0.0" xmlns:witsml="http://www.witsml.org/schemas/1series" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.witsml.org/schemas/1series http://www.npd.no/schema/DDRS/1series/WITSML_drillReport_profiled_schema_phase2.xsd">
  <witsml:documentInfo>
    <witsml:documentName>Drill Report</witsml:documentName>
    <witsml:documentDate>2011-09-29T10:13:31.001Z</witsml:documentDate>
    <witsml:owner>ConocoPhillips</witsml:owner>
  </witsml:documentInfo>
  <witsml:drillReport>
    <witsml:nameWell>2/4-B-17 C</witsml:nameWell>
    <witsml:nameWellbore>2/4-B-17 C</witsml:nameWellbore>
    <witsml:name>2/4-B-17</witsml:name>
    <witsml:dTimStart>2011-09-28T01:00:00.001Z</witsml:dTimStart>
    <witsml:dTimEnd>2011-09-29T00:00:00.001Z</witsml:dTimEnd>
    <witsml:versionKind>normal</witsml:versionKind>
    <witsml:createDate>2011-09-29T10:13:31.001Z</witsml:createDate>
    <witsml:wellAlias>
      <witsml:name>2/4-B-17 C</witsml:name>
      <witsml:namingSystem>NPD code</witsml:namingSystem>
    </witsml:wellAlias>
    <witsml:wellboreAlias>
      <witsml:name>2/4-B-17 C</witsml:name>
      <witsml:namingSystem>NPD code</witsml:namingSystem>
    </witsml:wellboreAlias>
    <witsml:wellboreAlias>
      <witsml:name>4656</witsml:name>
      <witsml:namingSystem>NPD number</witsml:namingSystem>
    </witsml:wellboreAlias>
    <witsml:wellDatum>
      <witsml:name>Kelly Bushing</witsml:name>
      <witsml:code>KB</witsml:code>
      <witsml:elevation uom="m" datum="SL">0</witsml:elevation>
    </witsml:wellDatum>
    <witsml:wellDatum>
      <witsml:name>Sea Level</witsml:name>
      <witsml:code>SL</witsml:code>
    </witsml:wellDatum>
    <witsml:wellCRS>
      <witsml:name>ED50</witsml:name>
      <witsml:geographic>
        <witsml:geodeticDatumCode>ED50</witsml:geodeticDatumCode>
      </witsml:geographic>
    </witsml:wellCRS>
    <witsml:wellboreInfo>
      <witsml:operator>ConocoPhillips</witsml:operator>
      <witsml:drillContractor>ARCHER</witsml:drillContractor>
      <witsml:rigAlias>
        <witsml:name>Ekofisk B</witsml:name>
        <witsml:namingSystem>NPD Name</witsml:namingSystem>
      </witsml:rigAlias>
      <witsml:rigAlias>
        <witsml:name>271413</witsml:name>
        <witsml:namingSystem>NPD code</witsml:namingSystem>
      </witsml:rigAlias>
    </witsml:wellboreInfo>
    <witsml:statusInfo>
      <witsml:dTim>2011-09-28T01:00:00.001Z</witsml:dTim>
      <witsml:md uom="m">3061.106</witsml:md>
      <witsml:tvd uom="m">0</witsml:tvd>
      <witsml:typeWellbore>sidetrack</witsml:typeWellbore>
      <witsml:mdKickoff uom="m">655.32</witsml:mdKickoff>
      <witsml:tvdKickoff uom="m">-8.042</witsml:tvdKickoff>
      <witsml:diaCsgLast uom="in">6.625</witsml:diaCsgLast>
      <witsml:mdCsgLast uom="m">4343.275</witsml:mdCsgLast>
      <witsml:tvdCsgLast uom="m">-0.035</witsml:tvdCsgLast>
      <witsml:elevKelly uom="m">12.497</witsml:elevKelly>
      <witsml:sum24Hr>Rigged up on well and pulled prong in plug.</witsml:sum24Hr>
      <witsml:forecast24Hr>Pull plug body. rig over to 5/16" E-line and set Halliburton EVO brigde plug</witsml:forecast24Hr>
    </witsml:statusInfo>
    <witsml:extendedReport dTim="2011-09-29T04:30:00.001Z">Jarring to pull plug body at 10044'</witsml:extendedReport>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T01:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T02:15:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- other</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Take over well from Drift. Prepare equipment.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T02:15:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T02:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- other</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Hold Prejob Safety meeting with all involved personell prior to rig up</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T02:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T05:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- rig up/down</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Remove tree cap and rig up riser, bop , lub and cicksan.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T05:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T06:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- completion string</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>P/u tool streng. Stab on lub</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T06:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T08:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- flow</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Pressure test w/l rigup. 300/5000 psi. 5/10 min. Test ok</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T08:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T11:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">3060.192</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- wire line</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Run # 1, SWHP 2159 psi, A-ann 238 psi (ASV closed) Rih with 4,11" drift and pressure gauges to drift well. Tag at 10040' wlm. Perform stationary p/t reading. Pooh.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T11:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T15:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- completion string</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>L/d toolstring. Check data ok on p/t gauge and stored same in MaxWell. Perform lifts from M.I. Add 30 ltr RX-72. R/u toolstring. Bleed off tbg pressure from 2045 to 580 psi - medium; gas. Perform Well control drill with WL crew.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T15:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T19:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">3060.802</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- hydraulic workover</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Run#2: SWHP 580 psi. Rih with 4" SB. Stop above prong, bleed off tbg pressure from 660 psi to 210 psi. Latch prong at 10042', jarred up 17 times. Pressure increased from 250 psi to 876 psi. Pooh.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T19:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T22:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- completion string</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Ooh. Swhp = 896 psi. Close well and bleed of lub. Problem with closing swab valve investigate. L/d tool streng and prong. P/u new tool streng. 45 l of Rx72 into lub. P/t lub and open well</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T22:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-29T00:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">3061.106</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- hydraulic workover</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Run # 3 Swhp = 950 psi Rih with 4"GS to retreive plug body. Latch plug at 10043' wlm. Start jarring with meck jar and Well Equip jar.</witsml:comments>
    </witsml:activity>
  </witsml:drillReport>
  <witsml:drillReport>
    <witsml:nameWell>2/4-B-18 D</witsml:nameWell>
    <witsml:nameWellbore>2/4-B-18 D</witsml:nameWellbore>
    <witsml:name>2/4-B-18</witsml:name>
    <witsml:dTimStart>2011-09-28T00:00:00.001Z</witsml:dTimStart>
    <witsml:dTimEnd>2011-09-29T00:00:00.001Z</witsml:dTimEnd>
    <witsml:versionKind>normal</witsml:versionKind>
    <witsml:createDate>2011-09-29T10:13:43.001Z</witsml:createDate>
    <witsml:wellAlias>
      <witsml:name>2/4-B-18 D</witsml:name>
      <witsml:namingSystem>NPD code</witsml:namingSystem>
    </witsml:wellAlias>
    <witsml:wellboreAlias>
      <witsml:name>2/4-B-18 D</witsml:name>
      <witsml:namingSystem>NPD code</witsml:namingSystem>
    </witsml:wellboreAlias>
    <witsml:wellboreAlias>
      <witsml:name>6618</witsml:name>
      <witsml:namingSystem>NPD number</witsml:namingSystem>
    </witsml:wellboreAlias>
    <witsml:wellDatum>
      <witsml:name>Kelly Bushing</witsml:name>
      <witsml:code>KB</witsml:code>
      <witsml:elevation uom="m" datum="SL">0</witsml:elevation>
    </witsml:wellDatum>
    <witsml:wellDatum>
      <witsml:name>Sea Level</witsml:name>
      <witsml:code>SL</witsml:code>
    </witsml:wellDatum>
    <witsml:wellCRS>
      <witsml:name>ED50</witsml:name>
      <witsml:geographic>
        <witsml:geodeticDatumCode>ED50</witsml:geodeticDatumCode>
      </witsml:geographic>
    </witsml:wellCRS>
    <witsml:wellboreInfo>
      <witsml:dTimSpud>2011-07-17T02:30:00.001Z</witsml:dTimSpud>
      <witsml:operator>ConocoPhillips</witsml:operator>
      <witsml:drillContractor>MAERSK INNOVATOR NORGE AS</witsml:drillContractor>
      <witsml:rigAlias>
        <witsml:name>MÆRSK INNOVATOR</witsml:name>
        <witsml:namingSystem>NPD Name</witsml:namingSystem>
      </witsml:rigAlias>
      <witsml:rigAlias>
        <witsml:name>297838</witsml:name>
        <witsml:namingSystem>NPD code</witsml:namingSystem>
      </witsml:rigAlias>
    </witsml:wellboreInfo>
    <witsml:statusInfo>
      <witsml:dTim>2011-09-28T00:00:00.001Z</witsml:dTim>
      <witsml:md uom="m">0</witsml:md>
      <witsml:tvd uom="m">3190.367</witsml:tvd>
      <witsml:typeWellbore>sidetrack</witsml:typeWellbore>
      <witsml:mdKickoff uom="m">1591.452</witsml:mdKickoff>
      <witsml:tvdKickoff uom="m">1544.084</witsml:tvdKickoff>
      <witsml:diaCsgLast uom="in">7.625</witsml:diaCsgLast>
      <witsml:mdCsgLast uom="m">5799.125</witsml:mdCsgLast>
      <witsml:tvdCsgLast uom="m">3190.723</witsml:tvdCsgLast>
      <witsml:distDrill uom="m">0</witsml:distDrill>
      <witsml:elevKelly uom="m">63.795</witsml:elevKelly>
      <witsml:sum24Hr>Cont rig maint while WO WS to replace plug in B-17, neighboring well.</witsml:sum24Hr>
      <witsml:forecast24Hr>WO B-17 WS work as per simops criteria from town.</witsml:forecast24Hr>
    </witsml:statusInfo>
    <witsml:extendedReport dTim="2011-09-28T06:00:00.001Z">WO WS to replace plug in B-17</witsml:extendedReport>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T00:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-29T00:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>interruption -- maintain</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Wait on WellService to replace downhole plug in B-17 at 10055'. This whilst cont conduct rig service &amp; maintenance. - Change oil and filter on TDS. - Hose tagging project. - Test hydraulic valves on choke. - Prepare hoses for circ brine in B-17. - Change actuator on main suction from pit #6. - Service slurry pumps. - Move swivels and Claxton tension pad eyes to Bravo skid deck. - Remove valves and install blind flange on pulsation dampner. - Ventilation upgrade in shaker room. - IKM perform calibration of pressure gauges on manifolds and lines.</witsml:comments>
    </witsml:activity>
  </witsml:drillReport>
  <witsml:drillReport>
    <witsml:nameWell>2/4-B-9 B</witsml:nameWell>
    <witsml:nameWellbore>2/4-B-9 B</witsml:nameWellbore>
    <witsml:name>2/4-B-9</witsml:name>
    <witsml:dTimStart>2011-09-28T00:00:00.001Z</witsml:dTimStart>
    <witsml:dTimEnd>2011-09-29T00:00:00.001Z</witsml:dTimEnd>
    <witsml:versionKind>normal</witsml:versionKind>
    <witsml:createDate>2011-09-29T10:13:50.001Z</witsml:createDate>
    <witsml:wellAlias>
      <witsml:name>2/4-B-9 B</witsml:name>
      <witsml:namingSystem>NPD code</witsml:namingSystem>
    </witsml:wellAlias>
    <witsml:wellboreAlias>
      <witsml:name>2/4-B-9 B</witsml:name>
      <witsml:namingSystem>NPD code</witsml:namingSystem>
    </witsml:wellboreAlias>
    <witsml:wellboreAlias>
      <witsml:name>4549</witsml:name>
      <witsml:namingSystem>NPD number</witsml:namingSystem>
    </witsml:wellboreAlias>
    <witsml:wellDatum>
      <witsml:name>Kelly Bushing</witsml:name>
      <witsml:code>KB</witsml:code>
      <witsml:elevation uom="m" datum="SL">32.918</witsml:elevation>
    </witsml:wellDatum>
    <witsml:wellDatum>
      <witsml:name>Sea Level</witsml:name>
      <witsml:code>SL</witsml:code>
    </witsml:wellDatum>
    <witsml:wellCRS>
      <witsml:name>ED50</witsml:name>
      <witsml:geographic>
        <witsml:geodeticDatumCode>ED50</witsml:geodeticDatumCode>
      </witsml:geographic>
    </witsml:wellCRS>
    <witsml:wellboreInfo>
      <witsml:operator>ConocoPhillips</witsml:operator>
      <witsml:drillContractor>ARCHER</witsml:drillContractor>
      <witsml:rigAlias>
        <witsml:name>EKOFISK B</witsml:name>
        <witsml:namingSystem>NPD Name</witsml:namingSystem>
      </witsml:rigAlias>
      <witsml:rigAlias>
        <witsml:name>271413</witsml:name>
        <witsml:namingSystem>NPD code</witsml:namingSystem>
      </witsml:rigAlias>
    </witsml:wellboreInfo>
    <witsml:statusInfo>
      <witsml:dTim>2011-09-28T00:00:00.001Z</witsml:dTim>
      <witsml:md uom="m">0</witsml:md>
      <witsml:tvd uom="m">0</witsml:tvd>
      <witsml:typeWellbore>sidetrack</witsml:typeWellbore>
      <witsml:mdKickoff uom="m">1114.958</witsml:mdKickoff>
      <witsml:diaCsgLast uom="in">13.625</witsml:diaCsgLast>
      <witsml:mdCsgLast uom="m">1575.511</witsml:mdCsgLast>
      <witsml:elevKelly uom="m">50.902</witsml:elevKelly>
      <witsml:sum24Hr>Cont observe well while wait on WS to complete plug replacement in B-17.</witsml:sum24Hr>
      <witsml:forecast24Hr>WO WS as per simops criteria from town.</witsml:forecast24Hr>
    </witsml:statusInfo>
    <witsml:extendedReport dTim="2011-09-28T06:00:00.001Z">Observe well while wait on WS to complete B-17.</witsml:extendedReport>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T00:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-29T00:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- flow</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Cont observe tbg + ann press via CCR's sensors - as WO WS to complete WL work on neighboring well B-17 (downhole plug replacement) - as per simops criteria from town : (Note that tbg press recorder reads an error of 38 psi when the real press is 0 psi). TimeTubingAnnulus 00:00 hrs41 psi0 psi 02:00 hrs42 psi0 psi 05:00 hrs46 psi0 psi 07:30 hrs         46 psi            4 psi 10:10 hrs         46 psi            4 psi 13:00 hrs         46 psi            7 psi 17:20 hrs         48 psi           11 psi 20:00 hrs         46 psi           16 psi 23:00 hrs         48 psi           30 psi</witsml:comments>
    </witsml:activity>
  </witsml:drillReport>
  <witsml:drillReport>
    <witsml:nameWell>2/4-E-9</witsml:nameWell>
    <witsml:nameWellbore>2/4-E-9</witsml:nameWellbore>
    <witsml:name>2/4-E-9</witsml:name>
    <witsml:dTimStart>2011-09-28T00:00:00.001Z</witsml:dTimStart>
    <witsml:dTimEnd>2011-09-29T00:00:00.001Z</witsml:dTimEnd>
    <witsml:versionKind>normal</witsml:versionKind>
    <witsml:createDate>2011-09-29T10:13:51.001Z</witsml:createDate>
    <witsml:wellAlias>
      <witsml:name>2/4-E-9</witsml:name>
      <witsml:namingSystem>NPD code</witsml:namingSystem>
    </witsml:wellAlias>
    <witsml:wellboreAlias>
      <witsml:name>2/4-E-9</witsml:name>
      <witsml:namingSystem>NPD code</witsml:namingSystem>
    </witsml:wellboreAlias>
    <witsml:wellboreAlias>
      <witsml:name>733</witsml:name>
      <witsml:namingSystem>NPD number</witsml:namingSystem>
    </witsml:wellboreAlias>
    <witsml:wellDatum>
      <witsml:name>Kelly Bushing</witsml:name>
      <witsml:code>KB</witsml:code>
      <witsml:elevation uom="m" datum="SL">41.453</witsml:elevation>
    </witsml:wellDatum>
    <witsml:wellDatum>
      <witsml:name>Sea Level</witsml:name>
      <witsml:code>SL</witsml:code>
    </witsml:wellDatum>
    <witsml:wellCRS>
      <witsml:name>ED50</witsml:name>
      <witsml:geographic>
        <witsml:geodeticDatumCode>ED50</witsml:geodeticDatumCode>
      </witsml:geographic>
    </witsml:wellCRS>
    <witsml:wellboreInfo>
      <witsml:operator>ConocoPhillips</witsml:operator>
      <witsml:rigAlias>
        <witsml:name>TOR</witsml:name>
        <witsml:namingSystem>NPD Name</witsml:namingSystem>
      </witsml:rigAlias>
      <witsml:rigAlias>
        <witsml:name>271525</witsml:name>
        <witsml:namingSystem>NPD code</witsml:namingSystem>
      </witsml:rigAlias>
    </witsml:wellboreInfo>
    <witsml:statusInfo>
      <witsml:dTim>2011-09-28T00:00:00.001Z</witsml:dTim>
      <witsml:md uom="m">2233.574</witsml:md>
      <witsml:mdPlugTop uom="m">3415.589</witsml:mdPlugTop>
      <witsml:typeWellbore>initial</witsml:typeWellbore>
      <witsml:mdKickoff uom="m">0</witsml:mdKickoff>
      <witsml:elevKelly uom="m">41.758</witsml:elevKelly>
      <witsml:sum24Hr>Pull Baker TTRBP on third attempt. Unable to pull Dummy valve on first attempt.</witsml:sum24Hr>
      <witsml:forecast24Hr>Replace dummy with GLV, Set DHSV.</witsml:forecast24Hr>
    </witsml:statusInfo>
    <witsml:extendedReport dTim="2011-09-29T04:00:00.001Z">OOH redress KOT and JDC.</witsml:extendedReport>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T00:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T01:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- completion string</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>equipment failure</witsml:stateDetailActivity>
      <witsml:comments>Start to shear off plug, jar down, work tool string for 1 hrs 20 min, before tool sheared.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T01:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T02:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- completion string</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>equipment failure</witsml:stateDetailActivity>
      <witsml:comments>POOH.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T02:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T05:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- completion string</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>equipment failure</witsml:stateDetailActivity>
      <witsml:comments>OOH. WHP 200 psi. Secure well. Lay down tool string, Baker pulling tool left in hole, as per procedure ( latch on plug ) . Cut off 100 ft wire and make new rope socket. Take off one 5 ft stem and add accelerator. Redress 2" DJD with brass, redress and test hydraulic jar. Fill lubricator with glycol and leak test lubricator.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T05:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T09:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- completion string</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Run # 14. Open well, Siwhp 400 psi. Rih with 2" DJD pulling tool. Latch Baker TTRBP at 8836 ft wlm, jar up 28 times with max 1500 lbs pull (900 lbs overpull) Set down to reload jar, pick up, tools came free, Pooh.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T09:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T13:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- completion string</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Lay down toolstring, found DJD P-tool sheared. Repin tool with steel pins. Cut 30 ft wire and make up new rope socket. Pick up toolstring. Leak test lubricator, ok.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T13:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T19:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- completion string</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Run # 15. Open well, Siwhp 400 psi. Rih with 2" DJD P-tool. Latch plug at 8833 ft wlm. Jar up 28 times, plug released, wait 30 min to let plug deflate. Pooh.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T19:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T22:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- completion string</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Lay down TTRBP infl plug, all rubber element missing. P/u 8 ft stem, spang jar, k/j, McMurry KOT and JDC pulling tool. Fill lubricator with glycol and leak test lubricator.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T22:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-29T00:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">2233.574</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- completion string</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Run # 16. Open well, Siwhp 470 psi. Annulus A 120 psi, bleed down annulus to 2 psi. Rih with McMurry KOT and JDC pulling tool. Locate and set down in SPM at 7333 ft wlm, unable to latch, suspect pin in JDC pulling tool is sheared. POOH.</witsml:comments>
    </witsml:activity>
  </witsml:drillReport>
  <witsml:drillReport>
    <witsml:nameWell>2/4-K-8 B</witsml:nameWell>
    <witsml:nameWellbore>2/4-K-8 B T2</witsml:nameWellbore>
    <witsml:name>2/4-K-8</witsml:name>
    <witsml:dTimStart>2011-09-28T00:00:00.001Z</witsml:dTimStart>
    <witsml:dTimEnd>2011-09-29T00:00:00.001Z</witsml:dTimEnd>
    <witsml:versionKind>normal</witsml:versionKind>
    <witsml:createDate>2011-09-29T10:13:57.001Z</witsml:createDate>
    <witsml:wellAlias>
      <witsml:name>2/4-K-8 B</witsml:name>
      <witsml:namingSystem>NPD code</witsml:namingSystem>
    </witsml:wellAlias>
    <witsml:wellboreAlias>
      <witsml:name>2/4-K-8 B T2</witsml:name>
      <witsml:namingSystem>NPD code</witsml:namingSystem>
    </witsml:wellboreAlias>
    <witsml:wellboreAlias>
      <witsml:name>6609</witsml:name>
      <witsml:namingSystem>NPD number</witsml:namingSystem>
    </witsml:wellboreAlias>
    <witsml:wellDatum>
      <witsml:name>Kelly Bushing</witsml:name>
      <witsml:code>KB</witsml:code>
      <witsml:elevation uom="m" datum="SL">36.271</witsml:elevation>
    </witsml:wellDatum>
    <witsml:wellDatum>
      <witsml:name>Sea Level</witsml:name>
      <witsml:code>SL</witsml:code>
    </witsml:wellDatum>
    <witsml:wellCRS>
      <witsml:name>ED50</witsml:name>
      <witsml:geographic>
        <witsml:geodeticDatumCode>ED50</witsml:geodeticDatumCode>
      </witsml:geographic>
    </witsml:wellCRS>
    <witsml:wellboreInfo>
      <witsml:operator>ConocoPhillips</witsml:operator>
      <witsml:drillContractor>ARCHER</witsml:drillContractor>
      <witsml:rigAlias>
        <witsml:name>EKOFISK K</witsml:name>
        <witsml:namingSystem>NPD Name</witsml:namingSystem>
      </witsml:rigAlias>
      <witsml:rigAlias>
        <witsml:name>271469</witsml:name>
        <witsml:namingSystem>NPD code</witsml:namingSystem>
      </witsml:rigAlias>
    </witsml:wellboreInfo>
    <witsml:statusInfo>
      <witsml:dTim>2011-09-28T00:00:00.001Z</witsml:dTim>
      <witsml:md uom="m">2923.947</witsml:md>
      <witsml:tvd uom="m">2056.008</witsml:tvd>
      <witsml:typeWellbore>bypass</witsml:typeWellbore>
      <witsml:mdKickoff uom="m">2743.81</witsml:mdKickoff>
      <witsml:tvdKickoff uom="m">1947.449</witsml:tvdKickoff>
      <witsml:diaCsgLast uom="in">10.75</witsml:diaCsgLast>
      <witsml:mdCsgLast uom="m">2735.885</witsml:mdCsgLast>
      <witsml:distDrill uom="m">180.137</witsml:distDrill>
      <witsml:elevKelly uom="m">56.693</witsml:elevKelly>
      <witsml:sum24Hr>Rih w/ motor assy. Drill cmt and kick off well. Drill &amp; orientate8 1/2" hole to 9593 ft.</witsml:sum24Hr>
      <witsml:forecast24Hr>Pull out with motor assy. Press test bop. Run in with steerable assy.</witsml:forecast24Hr>
      <witsml:ropCurrent uom="m/h">30.263</witsml:ropCurrent>
    </witsml:statusInfo>
    <witsml:bitRecord>
      <witsml:numBit>3.3</witsml:numBit>
      <witsml:diaBit uom="in">8.5</witsml:diaBit>
      <witsml:manufacturer>HTC</witsml:manufacturer>
      <witsml:codeMfg>MX-3</witsml:codeMfg>
    </witsml:bitRecord>
    <witsml:fluid>
      <witsml:type>Warp</witsml:type>
      <witsml:dTim>2011-09-28T23:00:00.001Z</witsml:dTim>
      <witsml:md uom="m">2923.337</witsml:md>
      <witsml:tvd uom="m">2059.94</witsml:tvd>
      <witsml:presBopRating uom="bar">344.738</witsml:presBopRating>
      <witsml:mudClass>oil based</witsml:mudClass>
      <witsml:density uom="g/cm3">1.737</witsml:density>
      <witsml:pv uom="mPa.s">37</witsml:pv>
      <witsml:yp uom="Pa">3.83</witsml:yp>
    </witsml:fluid>
    <witsml:extendedReport dTim="2011-09-29T05:45:00.001Z">Pump down Gyro-Data gyro tool at 9593 ft,</witsml:extendedReport>
    <witsml:surveyStation>
      <witsml:dTim>2011-09-28T00:00:00.001Z</witsml:dTim>
      <witsml:md uom="m">2795.138</witsml:md>
      <witsml:tvd uom="m">1978.771</witsml:tvd>
      <witsml:incl uom="dega">53.01</witsml:incl>
      <witsml:azi uom="dega">191.43</witsml:azi>
    </witsml:surveyStation>
    <witsml:surveyStation>
      <witsml:dTim>2011-09-28T00:00:00.001Z</witsml:dTim>
      <witsml:md uom="m">2835.189</witsml:md>
      <witsml:tvd uom="m">2002.737</witsml:tvd>
      <witsml:incl uom="dega">53.49</witsml:incl>
      <witsml:azi uom="dega">194.16</witsml:azi>
    </witsml:surveyStation>
    <witsml:surveyStation>
      <witsml:dTim>2011-09-28T00:00:00.001Z</witsml:dTim>
      <witsml:md uom="m">2853.141</witsml:md>
      <witsml:tvd uom="m">2013.463</witsml:tvd>
      <witsml:incl uom="dega">53.13</witsml:incl>
      <witsml:azi uom="dega">193.08</witsml:azi>
    </witsml:surveyStation>
    <witsml:surveyStation>
      <witsml:dTim>2011-09-28T00:00:00.001Z</witsml:dTim>
      <witsml:md uom="m">2882.036</witsml:md>
      <witsml:tvd uom="m">2030.761</witsml:tvd>
      <witsml:incl uom="dega">53.33</witsml:incl>
      <witsml:azi uom="dega">191.26</witsml:azi>
    </witsml:surveyStation>
    <witsml:surveyStation>
      <witsml:dTim>2011-09-28T00:00:00.001Z</witsml:dTim>
      <witsml:md uom="m">2910.931</witsml:md>
      <witsml:tvd uom="m">2048.147</witsml:tvd>
      <witsml:incl uom="dega">52.69</witsml:incl>
      <witsml:azi uom="dega">189.91</witsml:azi>
    </witsml:surveyStation>
    <witsml:surveyStation>
      <witsml:dTim>2011-09-28T00:00:00.001Z</witsml:dTim>
      <witsml:md uom="m">2923.947</witsml:md>
      <witsml:tvd uom="m">2056.008</witsml:tvd>
      <witsml:incl uom="dega">53</witsml:incl>
      <witsml:azi uom="dega">190</witsml:azi>
    </witsml:surveyStation>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T00:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T01:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">927.506</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- trip</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>equipment failure</witsml:stateDetailActivity>
      <witsml:comments>Continue rih with 8 1/2" motor BHA on 5" dp from 700 - 3043 ft</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T01:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T02:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">927.506</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- other</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>equipment failure</witsml:stateDetailActivity>
      <witsml:comments>Fill string and perform shallow hole test with 370 gpm, 1621 psi</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T02:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T06:15:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">2696.261</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- trip</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>equipment failure</witsml:stateDetailActivity>
      <witsml:comments>Continue rih with 5" dp from 3043 - 8846 ft.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T06:15:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T08:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">2743.81</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- circulating conditioning</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>equipment failure</witsml:stateDetailActivity>
      <witsml:comments>Wash down from 8846 ft to 9002 ft at 152 gpm, 615 psi. Max WOB 20 Klbs when sliding through window from 8976 - 8996 ft.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T08:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T13:45:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">2807.818</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- drill</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>equipment failure</witsml:stateDetailActivity>
      <witsml:comments>Kick off, orient and drill 8 1/2" hole from 9002 ft to 9212 ft. 300 - 500 gpm, 3850-3750 psi, 5-20 Klbs WOB. 60-100 rpm when rotating, 7-9 Kft.lbs torque</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T13:45:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T19:45:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">2923.947</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- drill</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Orient, drill and survey 8 1/2" hole from 9212 ft to 9593 ft. 500 gpm, 3700 psi, 5-20 Klbs WOB. 60-100 rpm when rotating, 7-9 Kft.lbs torque. No gas. Observe some cavings consisting of lumps and slivers. Mud on cuttings calculated to be 1.092 bbls.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T19:45:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T23:15:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">2923.947</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- circulating conditioning</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Circ hole clean with 500 gpm, 3660 psi, 120 rpm, 9-10 kft/lbs tq while reciprocating the string. Pump total 3 x bott up, observe a similar cavings trend as when driilling. Record up wt 219 klbs, down wt 181 klbs, 100 rpm 189 klbs with 8-9 klbs tq.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T23:15:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T23:45:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">2923.947</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- pressure detection</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Flow check well, static.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T23:45:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-29T00:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">2923.947</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- survey</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Drop Gyro-Data gyro tool.</witsml:comments>
    </witsml:activity>
  </witsml:drillReport>
  <witsml:drillReport>
    <witsml:nameWell>2/4-M-8 A</witsml:nameWell>
    <witsml:nameWellbore>2/4-M-8 A T4</witsml:nameWellbore>
    <witsml:name>2/4-M-8</witsml:name>
    <witsml:dTimStart>2011-09-28T00:00:00.001Z</witsml:dTimStart>
    <witsml:dTimEnd>2011-09-29T00:00:00.001Z</witsml:dTimEnd>
    <witsml:versionKind>normal</witsml:versionKind>
    <witsml:createDate>2011-09-29T10:16:54.001Z</witsml:createDate>
    <witsml:wellAlias>
      <witsml:name>2/4-M-8 A</witsml:name>
      <witsml:namingSystem>NPD code</witsml:namingSystem>
    </witsml:wellAlias>
    <witsml:wellboreAlias>
      <witsml:name>2/4-M-8 A T4</witsml:name>
      <witsml:namingSystem>NPD code</witsml:namingSystem>
    </witsml:wellboreAlias>
    <witsml:wellboreAlias>
      <witsml:name>5945</witsml:name>
      <witsml:namingSystem>NPD number</witsml:namingSystem>
    </witsml:wellboreAlias>
    <witsml:wellDatum>
      <witsml:name>Kelly Bushing</witsml:name>
      <witsml:code>KB</witsml:code>
      <witsml:elevation uom="m" datum="SL">35.052</witsml:elevation>
    </witsml:wellDatum>
    <witsml:wellDatum>
      <witsml:name>Sea Level</witsml:name>
      <witsml:code>SL</witsml:code>
    </witsml:wellDatum>
    <witsml:wellCRS>
      <witsml:name>ED50</witsml:name>
      <witsml:geographic>
        <witsml:geodeticDatumCode>ED50</witsml:geodeticDatumCode>
      </witsml:geographic>
    </witsml:wellCRS>
    <witsml:wellboreInfo>
      <witsml:operator>ConocoPhillips</witsml:operator>
      <witsml:drillContractor>SCHLUMBERGER NORGE AS</witsml:drillContractor>
      <witsml:rigAlias>
        <witsml:name>EKOFISK M</witsml:name>
        <witsml:namingSystem>NPD Name</witsml:namingSystem>
      </witsml:rigAlias>
      <witsml:rigAlias>
        <witsml:name>364198</witsml:name>
        <witsml:namingSystem>NPD code</witsml:namingSystem>
      </witsml:rigAlias>
    </witsml:wellboreInfo>
    <witsml:statusInfo>
      <witsml:dTim>2011-09-28T00:00:00.001Z</witsml:dTim>
      <witsml:md uom="m">707.136</witsml:md>
      <witsml:typeWellbore>sidetrack</witsml:typeWellbore>
      <witsml:mdKickoff uom="m">5945.124</witsml:mdKickoff>
      <witsml:tvdKickoff uom="m">3229.751</witsml:tvdKickoff>
      <witsml:diaCsgLast uom="in">5</witsml:diaCsgLast>
      <witsml:mdCsgLast uom="m">6564.783</witsml:mdCsgLast>
      <witsml:tvdCsgLast uom="m">3234.576</witsml:tvdCsgLast>
      <witsml:elevKelly uom="m">70.836</witsml:elevKelly>
      <witsml:sum24Hr>Finish test of stimulation systems. Stimulate perforation zone #15 @ 18050 ft. Release and reposition stimulation packers at zone #16 @17910 ft. Start stimulation of this zone but have to abort due to loosing weight and pressure, witch indicates loss of lower part of CT. Prepare kill plan, and kill well by use of sea water. Start to retrieve upper part of coil as per signed MOC program.</witsml:sum24Hr>
      <witsml:forecast24Hr>Retrieve upper part of coil from well, and prepare for running memory camera.</witsml:forecast24Hr>
    </witsml:statusInfo>
    <witsml:extendedReport dTim="2011-09-29T05:15:00.001Z">Pulling upper part of coil out of hole. @ 2321ft</witsml:extendedReport>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T00:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T00:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">5504.079</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- flow</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Set and test the boat PRV and trip settings.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T00:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T01:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">5504.079</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- other</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Perform job safety meeting on Stimulation vessel. Check all equipment and line up. Prepare for stimulation operation.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T01:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T05:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">5504.079</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- stimulate</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Star stimulation stage one at zone 15; 18050 ft. Start pump cooldown pad, increasing slowly up to 4,5 bpm. Observed a pressure increase after 40 bbls pumped. Reduce rate accordingly to the pressure increase, and stay within the pressure limitation given Weatherford. Continue pump the cooldown stage @ 2,5 bpm and pressure of 3000 psi. Switch to acid after a total of 130 bbl cooldown pad. Continue stimulate the zone as per stimulation program. Maximum rate during stimulation 10,5 bpm, and maximum pressure of 6700 Psi. Good indication of acid reaction when acid hits the formation. Isolate boat from reel, and allow coil to drain for one hour.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T05:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T06:45:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">5515.356</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- stimulate</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Slack of weight in stages of 5K, down to running weight. From running weight and down in 1K step to 5K below running weight. Not able to release packers. Pull back, up against pulling weigth, and then run in hole again. Able to move coil downwards after 5K set off. Running weight stabilized at normal running weight of 25K. Continu run in hole and stop @18095</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T06:45:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T07:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">5461.406</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- stimulate</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Pull back to next stimulation zone. @ 17910 ft. (Btm tool placement @17946 ft) (CT depth readings 17918 ft, = correlation of 28 ft). Slack off 10 Klbs.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T07:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T09:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">5461.406</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- stimulate</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Handover between shifts. Instruct and position guards on Haven. Flush lines and pumps on stimulation vessel. General preparations for stag 2 stimulation.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T09:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T11:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">5461.406</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- stimulate</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Start stimulation of perf interval 17910 ft - 17920 ft. Gradually increase pump rate &amp; pressure while pumping extended cooldown pad 130 bbls, observe straddle packer being activated at 51 bbls pumped. Pump 100 bbls HCL bbls stage. Pumped 60 bbls of planned 400 bbls gelled pad stage when sudden pump pressure drop and CT weight loss was observed. Pump rate / pressure at time of incident was 9,9 BPM / 6700 psi. Weight dropped from 66 Klbs to 18-19 Klbs. All HCL below CT connector when incident occured. Switch to pumping overflush, pumped total 400 bbls overflush at 9,9 BPM after assumed severing of CT downhole. Stop pumping at 10.46 hrs. SIWHP 356 psi.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T11:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T15:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">5455.615</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- stimulate</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>equipment failure</witsml:stateDetailActivity>
      <witsml:comments>Perform pull test from 17918 ft to 17899 ft, pulling weight 20 Klbs. at 11.45 hrs, SIWHP = 372 psi, internal CT press = 340 psi. Start pumping inhbt SW down CT at 2,3 BPM. Well on vacuum at 16.30 hrs, reduce pump rate to 1,2 BPM. Reduce pump rate to 1 BPM at 18:50 hrs, Meanwhile, prepare plan for recovering section of CT in well still attached to CT reel at surface. Receive approval for recovery procedure from Well Ops management.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T15:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T20:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">5455.615</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- other</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>operation failed</witsml:stateDetailActivity>
      <witsml:comments>Continue pumping inhbt SW into well through CT, well still on vacuum. Implementation of CT recovery plan hindered by irregular crew changes caused by delayed flights due to fog at Ekofisk.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T20:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T20:45:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">5455.615</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- other</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>equipment failure</witsml:stateDetailActivity>
      <witsml:comments>Perform crew change with new arrived crew.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T20:45:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T21:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">1122.883</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- other</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>equipment failure</witsml:stateDetailActivity>
      <witsml:comments>Perform pre job meeting with review of signed MOC, daily order for retrieval of upper part of coiled tubing. Set corrected depth to assumed brake point; 3684 ft.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T21:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T22:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">957.377</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- hydraulic workover</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>equipment failure</witsml:stateDetailActivity>
      <witsml:comments>Pull out of hole 15 ft/min according to retrieval program. Stop @ 3141 ft (corrected depth) due to general alarm on complex, related to fire and smoke development at Haven.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T22:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T23:15:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">957.377</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- other</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>operation failed</witsml:stateDetailActivity>
      <witsml:comments>Mobilize personnel, and prepare for securing of well if situation escalates. Awaiting feedback from platform manager.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T23:15:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-29T00:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">707.136</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- hydraulic workover</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>equipment failure</witsml:stateDetailActivity>
      <witsml:comments>Situation under control. Continue pull out of hole as per program; 15 ft/min. Depth readings at midnight: 2321 ft (correlated depth)</witsml:comments>
    </witsml:activity>
  </witsml:drillReport>
  <witsml:drillReport>
    <witsml:nameWell>2/4-X-17</witsml:nameWell>
    <witsml:nameWellbore>2/4-X-17 T2</witsml:nameWellbore>
    <witsml:name>2/4-X-17</witsml:name>
    <witsml:dTimStart>2011-09-28T17:00:00.001Z</witsml:dTimStart>
    <witsml:dTimEnd>2011-09-29T00:00:00.001Z</witsml:dTimEnd>
    <witsml:versionKind>normal</witsml:versionKind>
    <witsml:createDate>2011-09-29T10:17:07.001Z</witsml:createDate>
    <witsml:wellAlias>
      <witsml:name>2/4-X-17</witsml:name>
      <witsml:namingSystem>NPD code</witsml:namingSystem>
    </witsml:wellAlias>
    <witsml:wellboreAlias>
      <witsml:name>2/4-X-17 T2</witsml:name>
      <witsml:namingSystem>NPD code</witsml:namingSystem>
    </witsml:wellboreAlias>
    <witsml:wellboreAlias>
      <witsml:name>4304</witsml:name>
      <witsml:namingSystem>NPD number</witsml:namingSystem>
    </witsml:wellboreAlias>
    <witsml:wellDatum>
      <witsml:name>Kelly Bushing</witsml:name>
      <witsml:code>KB</witsml:code>
      <witsml:elevation uom="m" datum="SL">21.946</witsml:elevation>
    </witsml:wellDatum>
    <witsml:wellDatum>
      <witsml:name>Sea Level</witsml:name>
      <witsml:code>SL</witsml:code>
    </witsml:wellDatum>
    <witsml:wellCRS>
      <witsml:name>ED50</witsml:name>
      <witsml:geographic>
        <witsml:geodeticDatumCode>ED50</witsml:geodeticDatumCode>
      </witsml:geographic>
    </witsml:wellCRS>
    <witsml:wellboreInfo>
      <witsml:operator>ConocoPhillips</witsml:operator>
      <witsml:drillContractor>SCHLUMBERGER OFFSHORE SERVICES LTD</witsml:drillContractor>
      <witsml:rigAlias>
        <witsml:name>EKOFISK X</witsml:name>
        <witsml:namingSystem>NPD Name</witsml:namingSystem>
      </witsml:rigAlias>
      <witsml:rigAlias>
        <witsml:name>278525</witsml:name>
        <witsml:namingSystem>NPD code</witsml:namingSystem>
      </witsml:rigAlias>
    </witsml:wellboreInfo>
    <witsml:statusInfo>
      <witsml:dTim>2011-09-28T17:00:00.001Z</witsml:dTim>
      <witsml:md uom="m">0</witsml:md>
      <witsml:typeWellbore>bypass</witsml:typeWellbore>
      <witsml:mdKickoff uom="m">3592.982</witsml:mdKickoff>
      <witsml:tvdKickoff uom="m">3068.214</witsml:tvdKickoff>
      <witsml:diaCsgLast uom="in">5.5</witsml:diaCsgLast>
      <witsml:mdCsgLast uom="m">4326.636</witsml:mdCsgLast>
      <witsml:tvdCsgLast uom="m">3232.896</witsml:tvdCsgLast>
      <witsml:elevKelly uom="m">57.302</witsml:elevKelly>
      <witsml:sum24Hr>S/i well at 19:30 hrs. R/u treating lines for HR/LP Scale Squeeze.</witsml:sum24Hr>
      <witsml:forecast24Hr>Perform Scale Squeeze and hand well back to Facility.</witsml:forecast24Hr>
    </witsml:statusInfo>
    <witsml:extendedReport dTim="2011-09-29T05:00:00.001Z">P/u Coflexip hoses and Umbilical from Rem Vision.</witsml:extendedReport>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T17:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T19:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- rig up/down</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>With scaffolding pre-made, R/u 3 x 3" treating lines towards well.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T19:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T19:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- other</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Hold prejob safety meeting with all personnel involved.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T19:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T23:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- bop/wellhead equipment</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>At 19:30 hrs S/i well. Test tree cross to 4400 psi, test good. Remove WL adapter and install frac head.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T23:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-29T00:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- rig up/down</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>R/u lines to Frac head and secure with chains. Rem Vision alongside at 23:30 hrs. Lift up 2 x Coflexip hoses and land on north hanger.</witsml:comments>
    </witsml:activity>
  </witsml:drillReport>
  <witsml:drillReport>
    <witsml:nameWell>2/4-X-18</witsml:nameWell>
    <witsml:nameWellbore>2/4-X-18</witsml:nameWellbore>
    <witsml:name>2/4-X-18</witsml:name>
    <witsml:dTimStart>2011-09-28T00:00:00.001Z</witsml:dTimStart>
    <witsml:dTimEnd>2011-09-28T17:00:00.001Z</witsml:dTimEnd>
    <witsml:versionKind>normal</witsml:versionKind>
    <witsml:createDate>2011-09-29T10:17:12.001Z</witsml:createDate>
    <witsml:wellAlias>
      <witsml:name>2/4-X-18</witsml:name>
      <witsml:namingSystem>NPD code</witsml:namingSystem>
    </witsml:wellAlias>
    <witsml:wellboreAlias>
      <witsml:name>2/4-X-18</witsml:name>
      <witsml:namingSystem>NPD code</witsml:namingSystem>
    </witsml:wellboreAlias>
    <witsml:wellboreAlias>
      <witsml:name>4431</witsml:name>
      <witsml:namingSystem>NPD number</witsml:namingSystem>
    </witsml:wellboreAlias>
    <witsml:wellDatum>
      <witsml:name>Kelly Bushing</witsml:name>
      <witsml:code>KB</witsml:code>
      <witsml:elevation uom="m" datum="SL">21.946</witsml:elevation>
    </witsml:wellDatum>
    <witsml:wellDatum>
      <witsml:name>Sea Level</witsml:name>
      <witsml:code>SL</witsml:code>
    </witsml:wellDatum>
    <witsml:wellCRS>
      <witsml:name>ED50</witsml:name>
      <witsml:geographic>
        <witsml:geodeticDatumCode>ED50</witsml:geodeticDatumCode>
      </witsml:geographic>
    </witsml:wellCRS>
    <witsml:wellboreInfo>
      <witsml:dateDrillComplete>2011-09-28</witsml:dateDrillComplete>
      <witsml:operator>ConocoPhillips</witsml:operator>
      <witsml:drillContractor>ARCHER</witsml:drillContractor>
      <witsml:rigAlias>
        <witsml:name>EKOFISK X</witsml:name>
        <witsml:namingSystem>NPD Name</witsml:namingSystem>
      </witsml:rigAlias>
      <witsml:rigAlias>
        <witsml:name>278525</witsml:name>
        <witsml:namingSystem>NPD code</witsml:namingSystem>
      </witsml:rigAlias>
    </witsml:wellboreInfo>
    <witsml:statusInfo>
      <witsml:dTim>2011-09-28T00:00:00.001Z</witsml:dTim>
      <witsml:md uom="m">0</witsml:md>
      <witsml:mdPlugTop uom="m">0</witsml:mdPlugTop>
      <witsml:typeWellbore>initial</witsml:typeWellbore>
      <witsml:mdKickoff uom="m">0</witsml:mdKickoff>
      <witsml:diaCsgLast uom="in">5.5</witsml:diaCsgLast>
      <witsml:mdCsgLast uom="m">4892.04</witsml:mdCsgLast>
      <witsml:tvdCsgLast uom="m">3213.024</witsml:tvdCsgLast>
      <witsml:elevKelly uom="m">57.302</witsml:elevKelly>
      <witsml:sum24Hr>Completed A-annulus test using ScanWell LMS, test good. R/d Wireline. Work Completed. Well back on production at 18:45 hrs.</witsml:sum24Hr>
      <witsml:forecast24Hr>Job Complete.</witsml:forecast24Hr>
    </witsml:statusInfo>
    <witsml:extendedReport dTim="2011-09-28T21:00:00.001Z">Work Completed.</witsml:extendedReport>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T00:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T07:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- completion string</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>With ScanWell LMS connected to the A-ann continue bleed down. At 03:00 hrs, Shut in bleed off, press increased to 520 psi in 45 mins, press stable. At 04:00 hrs, start 3 hrs test monitoring pressure build-up. At 05:30 hrs, 520 psi At 07:00 hrs, 520 psi, A-annulus test good.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T07:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T09:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- rig up/down</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>R/d Wireline equipment, secure well and prepare to flow.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T09:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T12:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- flow</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Flow well to heat up well for DHSV test.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T12:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T14:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- completion string</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Test DHSV as per Cop specs, Test good.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T14:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T15:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- other</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Hold pre-job meeting for rigging down flanged riser from well.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T15:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T17:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>workover -- rig up/down</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>With well secure, rig down BOP and flanged riser section, Install tree cap and test same. Work completed.</witsml:comments>
    </witsml:activity>
  </witsml:drillReport>
  <witsml:drillReport>
    <witsml:nameWell>2/7-A-15 A</witsml:nameWell>
    <witsml:nameWellbore>2/7-A-15 A</witsml:nameWellbore>
    <witsml:name>2/7-A-15</witsml:name>
    <witsml:dTimStart>2011-09-28T00:00:00.001Z</witsml:dTimStart>
    <witsml:dTimEnd>2011-09-29T00:00:00.001Z</witsml:dTimEnd>
    <witsml:versionKind>normal</witsml:versionKind>
    <witsml:createDate>2011-09-29T10:17:17.001Z</witsml:createDate>
    <witsml:wellAlias>
      <witsml:name>2/7-A-15 A</witsml:name>
      <witsml:namingSystem>NPD code</witsml:namingSystem>
    </witsml:wellAlias>
    <witsml:wellboreAlias>
      <witsml:name>2/7-A-15 A</witsml:name>
      <witsml:namingSystem>NPD code</witsml:namingSystem>
    </witsml:wellboreAlias>
    <witsml:wellboreAlias>
      <witsml:name>3136</witsml:name>
      <witsml:namingSystem>NPD number</witsml:namingSystem>
    </witsml:wellboreAlias>
    <witsml:wellDatum>
      <witsml:name>Kelly Bushing</witsml:name>
      <witsml:code>KB</witsml:code>
      <witsml:elevation uom="m" datum="SL">41.758</witsml:elevation>
    </witsml:wellDatum>
    <witsml:wellDatum>
      <witsml:name>Sea Level</witsml:name>
      <witsml:code>SL</witsml:code>
    </witsml:wellDatum>
    <witsml:wellCRS>
      <witsml:name>ED50</witsml:name>
      <witsml:geographic>
        <witsml:geodeticDatumCode>ED50</witsml:geodeticDatumCode>
      </witsml:geographic>
    </witsml:wellCRS>
    <witsml:wellboreInfo>
      <witsml:operator>ConocoPhillips</witsml:operator>
      <witsml:drillContractor>ARCHER</witsml:drillContractor>
      <witsml:rigAlias>
        <witsml:name>ELDFISK A</witsml:name>
        <witsml:namingSystem>NPD Name</witsml:namingSystem>
      </witsml:rigAlias>
      <witsml:rigAlias>
        <witsml:name>271581</witsml:name>
        <witsml:namingSystem>NPD code</witsml:namingSystem>
      </witsml:rigAlias>
    </witsml:wellboreInfo>
    <witsml:statusInfo>
      <witsml:dTim>2011-09-28T00:00:00.001Z</witsml:dTim>
      <witsml:md uom="m">800.71</witsml:md>
      <witsml:tvd uom="m">1319.919</witsml:tvd>
      <witsml:typeWellbore>sidetrack</witsml:typeWellbore>
      <witsml:mdKickoff uom="m">2673.096</witsml:mdKickoff>
      <witsml:tvdKickoff uom="m">2354.096</witsml:tvdKickoff>
      <witsml:diaCsgLast uom="in">5</witsml:diaCsgLast>
      <witsml:mdCsgLast uom="m">4938.095</witsml:mdCsgLast>
      <witsml:distDrill uom="m">0</witsml:distDrill>
      <witsml:elevKelly uom="m">42.977</witsml:elevKelly>
      <witsml:sum24Hr>Mix 12.0 ppg WBM. Dispalce well to 12.0 ppg WBM. Pooh. Crew change. Rih w/13 3/8"EZSV at 2627' RT.</witsml:sum24Hr>
      <witsml:forecast24Hr>Rih &amp; set EZSV at 5230'. Circ &amp; cond. Cement. Pooh t/4800'. Circ. Pooh. Rih w/clean out assy.</witsml:forecast24Hr>
    </witsml:statusInfo>
    <witsml:extendedReport dTim="2011-09-29T04:30:00.001Z">Rih with ESV at 2627'</witsml:extendedReport>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T00:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T04:15:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">1597.152</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- circulating conditioning</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>operation failed</witsml:stateDetailActivity>
      <witsml:comments>Mix new 12.0 ppg water based mud system.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T04:15:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T04:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">1597.152</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- other</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>operation failed</witsml:stateDetailActivity>
      <witsml:comments>Perform pre-job displacement mtg.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T04:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T05:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">1597.152</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- circulating conditioning</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>operation failed</witsml:stateDetailActivity>
      <witsml:comments>Prepare to circ new mud system</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T05:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T07:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">1597.152</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- circulating conditioning</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>operation failed</witsml:stateDetailActivity>
      <witsml:comments>Displace well to 12.0 ppg WBM. 450 gpm, 2230 psi, 80 rpm. Take returns to cutting pit.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T07:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T08:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">1597.152</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- pressure detection</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>operation failed</witsml:stateDetailActivity>
      <witsml:comments>Fill trip tank. Flow check well. Ok</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T08:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T08:15:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">1597.152</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- circulating conditioning</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>operation failed</witsml:stateDetailActivity>
      <witsml:comments>Pump 15 bbl, 14.8 ppg slug.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T08:15:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T09:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">1330.147</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- trip</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>operation failed</witsml:stateDetailActivity>
      <witsml:comments>Pooh w/12 1/4" clean out assembly from 5240 ft to 4364 ft.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T09:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T10:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">1330.147</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- pressure detection</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>operation failed</witsml:stateDetailActivity>
      <witsml:comments>Flow check. Ok.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T10:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T13:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">132.893</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- trip</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>operation failed</witsml:stateDetailActivity>
      <witsml:comments>Pooh w/12 1/4" clean out assembly from 4364 ft to 436 ft.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T13:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T13:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">132.893</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- rig up/down</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>operation failed</witsml:stateDetailActivity>
      <witsml:comments>Change to handling equipment for DC's</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T13:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T15:15:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">18.898</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- trip</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>operation failed</witsml:stateDetailActivity>
      <witsml:comments>Pooh w/12 1/4" clean out assembly from 436 ft to 62 ft.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T15:15:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T16:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- trip</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>operation failed</witsml:stateDetailActivity>
      <witsml:comments>Change bowls. P/u 1 joint 5" hwdp. M/u same. Pull up and inspect clean out assembly. Ok. Rack back same in derrick.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T16:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T16:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- rig up/down</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>operation failed</witsml:stateDetailActivity>
      <witsml:comments>Dress I/R for 3 1/2". Change inserts in BX elevator.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T16:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T17:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- trip</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>operation failed</witsml:stateDetailActivity>
      <witsml:comments>P/u 1 joint 3 1/2" dp. M/u x-over and EZSV mechanical setting tool. Connect EZSV as per HB procedure.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T17:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T19:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- other</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>operation failed</witsml:stateDetailActivity>
      <witsml:comments>Wait on crew change due to fog and late helicopter. Handover with new crew.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T19:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T19:15:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- other</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>operation failed</witsml:stateDetailActivity>
      <witsml:comments>Preform pre-job mtg. for running EZSV.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T19:15:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T19:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- trip</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>operation failed</witsml:stateDetailActivity>
      <witsml:comments>Dress SRM to 5"dp.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T19:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T21:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">137.16</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- trip</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>operation failed</witsml:stateDetailActivity>
      <witsml:comments>P/u 13 jts of 3.5"dp.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T21:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T21:15:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">137.16</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- wait</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>equipment failure</witsml:stateDetailActivity>
      <witsml:comments>Trouble shoot Dino crane.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T21:15:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T22:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">268.224</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- trip</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>operation failed</witsml:stateDetailActivity>
      <witsml:comments>Cont P/u and m/u one 3.5"dp (1 jt). Change to 5" handling equipment. Cont p/u &amp; m/u 8 x 5"dp</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T22:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-29T00:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">800.71</witsml:md>
      <witsml:phase>fixed</witsml:phase>
      <witsml:proprietaryCode>drilling -- trip</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>operation failed</witsml:stateDetailActivity>
      <witsml:comments>Cont rih with 13 3/8"EZSV f/880' t/2627' at midnight</witsml:comments>
    </witsml:activity>
  </witsml:drillReport>
  <witsml:drillReport>
    <witsml:nameWell>2/7-A-27 A</witsml:nameWell>
    <witsml:nameWellbore>2/7-A-27 A T2</witsml:nameWellbore>
    <witsml:name>2/7-A-27</witsml:name>
    <witsml:dTimStart>2011-09-28T00:00:00.001Z</witsml:dTimStart>
    <witsml:dTimEnd>2011-09-29T00:00:00.001Z</witsml:dTimEnd>
    <witsml:versionKind>normal</witsml:versionKind>
    <witsml:createDate>2011-09-29T10:17:48.001Z</witsml:createDate>
    <witsml:wellAlias>
      <witsml:name>2/7-A-27 A</witsml:name>
      <witsml:namingSystem>NPD code</witsml:namingSystem>
    </witsml:wellAlias>
    <witsml:wellboreAlias>
      <witsml:name>2/7-A-27 A T2</witsml:name>
      <witsml:namingSystem>NPD code</witsml:namingSystem>
    </witsml:wellboreAlias>
    <witsml:wellboreAlias>
      <witsml:name>6547</witsml:name>
      <witsml:namingSystem>NPD number</witsml:namingSystem>
    </witsml:wellboreAlias>
    <witsml:wellDatum>
      <witsml:name>Kelly Bushing</witsml:name>
      <witsml:code>KB</witsml:code>
      <witsml:elevation uom="m" datum="SL">16.764</witsml:elevation>
    </witsml:wellDatum>
    <witsml:wellDatum>
      <witsml:name>Sea Level</witsml:name>
      <witsml:code>SL</witsml:code>
    </witsml:wellDatum>
    <witsml:wellCRS>
      <witsml:name>ED50</witsml:name>
      <witsml:geographic>
        <witsml:geodeticDatumCode>ED50</witsml:geodeticDatumCode>
      </witsml:geographic>
    </witsml:wellCRS>
    <witsml:wellboreInfo>
      <witsml:operator>ConocoPhillips</witsml:operator>
      <witsml:drillContractor>SCHLUMBERGER NORGE AS</witsml:drillContractor>
      <witsml:rigAlias>
        <witsml:name>ELDFISK A</witsml:name>
        <witsml:namingSystem>NPD Name</witsml:namingSystem>
      </witsml:rigAlias>
      <witsml:rigAlias>
        <witsml:name>271581</witsml:name>
        <witsml:namingSystem>NPD code</witsml:namingSystem>
      </witsml:rigAlias>
    </witsml:wellboreInfo>
    <witsml:statusInfo>
      <witsml:dTim>2011-09-28T00:00:00.001Z</witsml:dTim>
      <witsml:md uom="m">0</witsml:md>
      <witsml:tvd uom="m">0</witsml:tvd>
      <witsml:typeWellbore>bypass</witsml:typeWellbore>
      <witsml:mdKickoff uom="m">1571.244</witsml:mdKickoff>
      <witsml:diaCsgLast uom="in">5</witsml:diaCsgLast>
      <witsml:mdCsgLast uom="m">4778.045</witsml:mdCsgLast>
      <witsml:elevKelly uom="m">42.977</witsml:elevKelly>
      <witsml:sum24Hr>Held pre-job meeting. RU Stim riser, Frac Head, riser gate valves and Safety Head. Erected scaffolding around RU.</witsml:sum24Hr>
      <witsml:forecast24Hr>Continue RU, prepare for leak testing of lines.</witsml:forecast24Hr>
    </witsml:statusInfo>
    <witsml:extendedReport dTim="2011-09-28T17:00:00.001Z">Erecting scaffolding on Skid deck</witsml:extendedReport>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T00:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T01:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- rig up/down</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Prepare lifting equipment and secure area around hatch.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T01:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T02:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- other</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Pre-job/SJA meeting with all involved personnel.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T02:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T04:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- rig up/down</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Check Wellhead area prior to start RU. Remove small hatch, loosen nuts on X-mas tree cap. Install stim riser.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T04:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T11:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- rig up/down</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>Waiting on crane. Deck personnel occupied unloading vessel.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T11:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-29T00:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- rig up/down</witsml:proprietaryCode>
      <witsml:state>ok</witsml:state>
      <witsml:stateDetailActivity>success</witsml:stateDetailActivity>
      <witsml:comments>RU Frac head, riser gate valves and Safety Head. Skid Tower into position. Mount gate valves on Frac head. Torque up flanges. Erect scaffolding up to Safety Head flange.</witsml:comments>
    </witsml:activity>
  </witsml:drillReport>
  <witsml:drillReport>
    <witsml:nameWell>2/7-B-11 B</witsml:nameWell>
    <witsml:nameWellbore>2/7-B-11 B</witsml:nameWellbore>
    <witsml:name>2/7-B-11</witsml:name>
    <witsml:dTimStart>2011-09-28T00:00:00.001Z</witsml:dTimStart>
    <witsml:dTimEnd>2011-09-29T00:00:00.001Z</witsml:dTimEnd>
    <witsml:versionKind>normal</witsml:versionKind>
    <witsml:createDate>2011-09-29T10:17:52.001Z</witsml:createDate>
    <witsml:wellAlias>
      <witsml:name>2/7-B-11 B</witsml:name>
      <witsml:namingSystem>NPD code</witsml:namingSystem>
    </witsml:wellAlias>
    <witsml:wellboreAlias>
      <witsml:name>2/7-B-11 B</witsml:name>
      <witsml:namingSystem>NPD code</witsml:namingSystem>
    </witsml:wellboreAlias>
    <witsml:wellboreAlias>
      <witsml:name>4175</witsml:name>
      <witsml:namingSystem>NPD number</witsml:namingSystem>
    </witsml:wellboreAlias>
    <witsml:wellDatum>
      <witsml:name>Kelly Bushing</witsml:name>
      <witsml:code>KB</witsml:code>
      <witsml:elevation uom="m" datum="SL">22.25</witsml:elevation>
    </witsml:wellDatum>
    <witsml:wellDatum>
      <witsml:name>Sea Level</witsml:name>
      <witsml:code>SL</witsml:code>
    </witsml:wellDatum>
    <witsml:wellCRS>
      <witsml:name>ED50</witsml:name>
      <witsml:geographic>
        <witsml:geodeticDatumCode>ED50</witsml:geodeticDatumCode>
      </witsml:geographic>
    </witsml:wellCRS>
    <witsml:wellboreInfo>
      <witsml:operator>ConocoPhillips</witsml:operator>
      <witsml:drillContractor>SCHLUMBERGER NORGE AS</witsml:drillContractor>
      <witsml:rigAlias>
        <witsml:name>ELDFISK B</witsml:name>
        <witsml:namingSystem>NPD Name</witsml:namingSystem>
      </witsml:rigAlias>
      <witsml:rigAlias>
        <witsml:name>271609</witsml:name>
        <witsml:namingSystem>NPD code</witsml:namingSystem>
      </witsml:rigAlias>
    </witsml:wellboreInfo>
    <witsml:statusInfo>
      <witsml:dTim>2011-09-28T00:00:00.001Z</witsml:dTim>
      <witsml:md uom="m">3675.888</witsml:md>
      <witsml:tvd uom="m">0</witsml:tvd>
      <witsml:typeWellbore>sidetrack</witsml:typeWellbore>
      <witsml:mdKickoff uom="m">311.81</witsml:mdKickoff>
      <witsml:tvdKickoff uom="m">311.805</witsml:tvdKickoff>
      <witsml:diaCsgLast uom="in">5.5</witsml:diaCsgLast>
      <witsml:mdCsgLast uom="m">5123.078</witsml:mdCsgLast>
      <witsml:elevKelly uom="m">42.367</witsml:elevKelly>
      <witsml:sum24Hr>POOH w/3.6" Bowen overshot. RIH w/Bowen overshot and indexing tool.. Tag @ 12060 ft. Not able to pass.</witsml:sum24Hr>
      <witsml:forecast24Hr>POOH. Discuss with town on further actions.</witsml:forecast24Hr>
    </witsml:statusInfo>
    <witsml:extendedReport dTim="2011-09-29T05:30:00.001Z">@ 12060 ft. Attempt to pass w/fishingtool.</witsml:extendedReport>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T00:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T05:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">2971.8</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- wait</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>equipment failure</witsml:stateDetailActivity>
      <witsml:comments>@ 9750 ft/rkb. POOH w/3.6" Bowen overshot.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T05:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T08:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- rig up/down</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>equipment failure</witsml:stateDetailActivity>
      <witsml:comments>OOH. Secure well.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T08:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T09:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- rig up/down</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>equipment failure</witsml:stateDetailActivity>
      <witsml:comments>Latch off injector. L/d BHA. BHA slightly bent and small marks on mule-shoe (pictures in Maxwell file).</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T09:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T14:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- rig up/down</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>equipment failure</witsml:stateDetailActivity>
      <witsml:comments>Cut coil 6.2 mtrs. Make up and test new end connector to 35000 lbs.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T14:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T16:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- flow</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>equipment failure</witsml:stateDetailActivity>
      <witsml:comments>Pressuretest upper stripper and inflowtest check-valves as per procedure.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T16:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T17:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">0</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- hydraulic workover</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>equipment failure</witsml:stateDetailActivity>
      <witsml:comments>Displace riser to MEG. Pump 10 bbl MEG into well via lower kill.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T17:00:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-28T23:30:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">3675.888</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- wait</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>equipment failure</witsml:stateDetailActivity>
      <witsml:comments>Run # 4. Open well. RIH w/3.6" Bowen overshot and indexing tool. @ 23:20 hrs pass last HUD @ 11790 ft/rkb.</witsml:comments>
    </witsml:activity>
    <witsml:activity>
      <witsml:dTimStart>2011-09-28T23:30:00.001Z</witsml:dTimStart>
      <witsml:dTimEnd>2011-09-29T00:00:00.001Z</witsml:dTimEnd>
      <witsml:md uom="m">3675.888</witsml:md>
      <witsml:phase>coil</witsml:phase>
      <witsml:proprietaryCode>workover -- wait</witsml:proprietaryCode>
      <witsml:state>fail</witsml:state>
      <witsml:stateDetailActivity>equipment failure</witsml:stateDetailActivity>
      <witsml:comments>Tag restriction @ 12060 ft/rkb. Make 6 attempt to pass. Max speed = 40 ft/min. Max down force = 8000 lbs.</witsml:comments>
    </witsml:activity>
  </witsml:drillReport>
</witsml:drillReports>